Full specifications
| Make | Caterpillar | |
| Model | D8T | |
| Year | 2019 | |
| Serial Number | AW400647 | |
| Hours | 7,831 hrs | |
| Location | TX | |
| City | Bedford | |
| Gross Power | 347 hp | |
| Blade Type | Semi-U (SU) | |
| Transmission Type | Hydrostatic | |
| Ripper | Multi-shank | |
| Cutting Depth | 22.6 in | |
| Engine Make | 2236 | |
| Fuel Capacity | 170 gal | |
| Max Speed - Forward | 6.6 mph | |
| Height To Top Of Cab | 11.77 ft in | |
| Engine Model | C15 ACERT | |
| Net Power | 310 hp | |
| Pump Flow Capacity | 73 gal/min | |
| Width | 12.9 ft in | |
| 8a - Capacity - Sae J1265 | 6.8 yd3 | |
| 8a - Width - Over End Bits | 16.5 ft in | |
| 8su - Capacity - Sae J1265 | 13.4 yd3 | |
| 8su Lgp - Capacity - Sae J1265 | 12.9 yd3 | |
| 8su Lgp - Width - Over End Bits | 14.9 ft in | |
| 8su - Width - Over End Bits | 13.3 ft in | |
| 8u - Capacity - Sae J1265 | 15.4 yd3 | |
| 8u - Width - Over End Bits | 14 ft in | |
| Alternator Supplied Amperage | 100 amps | |
| Capacity | 11.4 yd3 | |
| Capacity - Sae J1265 | 6.8 yd3 | |
| Cooling System Fluid Capacity | 20.3 gal | |
| Digging Depth | 24.6 in | |
| Displacement | 928 cu in | |
| Engine Oil Capacity | 10 gal | |
| Final Drives Fluid Capacity | 3.3 gal | |
| Grouser Height | 3.1 in | |
| Hydraulic Fluid Capacity | 19.8 gal | |
| Length Of Track On Ground | 10.52 ft in | |
| Length W/ Blade | 19.99 ft in | |
| Length W/O Blade | 15.2 ft in | |
| Maximum Tilt | 28.9 in | |
| Number Of Carrier Rollers Per Side | 1 | |
| Number Of Forward Gears | 3 | |
| Number Of Reverse Gears | 3 | |
| Number Of Shoes Per Side | 44 | |
| Number Of Track Rollers Per Side | 8 | |
| Operating Voltage | 24 V | |
| Overall Length - Basic Tractor | 183 in | |
| Pitch | 8.5 in | |
| Powertrain Fluid Capacity | 41 gal | |
| Pump Type | piston-type, variable displacement | |
| Relief Valve Pressure | 5,700 psi | |
| Shipping Weight - Standard | 73,400 lb | |
| Shipping Weight - Standard Su Blade | 66,300 lb | |
| Shoe Type | Moderate Service | |
| Shoes/Side | 44 | |
| Standard Shoe Size | 24.02 in | |
| Total Operating Weight** - With Blade And Single-Shank Ripper | 88,700 lb | |
| Track Pitch | 8.5 in | |
| Track Rollers - Each Side | 8 | |
| Weight* - Without Hydraulic Controls | 11,900 lb | |
| Width - Over End Bits | 16.61 ft in | |
| Width Over Tracks | 8.84 ft in | |
| Width - Shoe | 38 in |
Caterpillar D8T Dozer, SU Blade, MS Ripper
$500,000
or as low as $9,124/mo with financing*2019 CATERPILLAR D8T CRAWLER DOZER: CAB, A/C, CAT C15 DIESEL ENGINE, 28" SBG, SINGLE TILT W/ SEMI U BLADE, 4 BBL 3 POCKET MSR W/ 2 SHANKS LOCATED IN INDIANA CALL FOR MORE PHOTOS AND CURRENT HOURS
- Meter (hours)
- 7,831 hrs
- Location
- TX
Ask the seller
Estimate financing
$9,124/mo
| Down payment (10%) | $50,000 |
| Term | 60 months |
| Est. APR | 8% |
*Estimate only. On approved credit. Not a financing offer.
Payment terms
Equify Financial's Payment Terms
All payments must be made via wire transfer. Instructions will be provided upon acceptance of your offer.
A $75.00 administrative fee will be applied to each titled item purchased.
Transferable titles will be sent to buyers via express mail or a similar service within 15 business days after full payment is received. Buyers are responsible for vehicle registration in their respective states or jurisdictions.
Full payment, including any applicable taxes and fees, is due within 3 business days of offer acceptance.
Partial payments are not accepted.
Failure to pay within this timeframe may result in cancellation of your offer. The item may then be returned to inventory or sold to another buyer.
Buying on PayDirt HQ
PayDirt HQ is a listing marketplace. It is not a party to the sale and does not hold funds, inspect equipment, or arrange freight.
