| Year | 2019 | |
| Make | Caterpillar | |
| Model | D6k2 XL | |
| Serial Number | CAT00D6KHMGM00470 | |
| Hours | 3,436 hrs | |
| Blade Type | 6-way PAT | |
| Engine Make | Caterpillar |
| Net Power - Iso 9249 | 130 hp | |
| Engine Model | Cat C6.6 ACERT | |
| Flywheel Power | 130 hp | |
| Engine Power@Iso 14396 | 155 hp | |
| Displacement | 402.8 cu in | |
| Bore | 4.2 in | |
| Stroke | 5 in | |
| Emissions |
$116,380
or as low as $2,124/mo with financing*2019 CATERPILLAR D6K2 XL CRAWLER DOZER: CAB, A/C, CAT C4.4B DIESEL ENGINE, 6 WAY STRAIGHT BLADE, 22″ SBG, DRAW BAR, REAR AUX HYD READY, REVERSE CAMERA, GRADE CNTRL/ GPS READY LOCATED IN INDIANA CALL FOR MORE PHOTOS AND CURRENT HOURS
Contact: Paul Williamson
$2,124/mo
| Down payment (10%) | $11,638 |
| Term | 60 months |
| Est. APR | 8% |
*Estimate only. On approved credit. Not a financing offer.
All payments must be made via wire transfer. Instructions will be provided upon acceptance of your offer.
A $75.00 administrative fee will be applied to each titled item purchased.
Transferable titles will be sent to buyers via express mail or a similar service within 15 business days after full payment is received. Buyers are responsible for vehicle registration in their respective states or jurisdictions.
Full payment, including any applicable taxes and fees, is due within 3 business days of offer acceptance.
Partial payments are not accepted.
Failure to pay within this timeframe may result in cancellation of your offer. The item may then be returned to inventory or sold to another buyer.
| U.S. EPA Tier 4 Interim/EU Stage IIIB/Japan MLIT Step 4 |
| Net Power - Sae J1349 | 128 hp |
| Gross Power - Sae J1995 | 158 hp |
| Net Power - Iso 9249 (Din) | 132 hp |
| Engine Power - Iso 14396 (Din) | 157 hp |
| Net Power - Eu 80/1269 Eec | 130 hp |
| Xl Vpat - Blade Capacity | 4.01 yd3 | |
| Xl Vpat - Blade Width Over End Bits | 10' 6" |
| Grouser Height | 1.9 in | |
| Width - Shoe - Xl | 22 in | |
| Shoes/Side - Xl | 40 | |
| Track Gauge - Xl | 70 in | |
| Track On Ground - Xl | 104 in | |
| Track Rollers/Side - Xl | 8 | |
| Ground Contact Area - Xl | 4,650 in2 | |
| Ground Pressure - Xl (Iso 16754) | 5.77 psi |
| Beam Cross Section | 165 211 mm (6.5 8.3 in) | |
| Number Of Pockets | 3 | |
| Ripper Type | Fixed Parallelogram | |
| Pocket Spacing | 3' | |
| Shank Gauge | 5' 11" | |
| Shank Section | 58.5 138 mm (2.3 5.4 in) | |
| Maximum Penetration Force - Xl | 9,480 lb ft | |
| Maximum Pry-Out Force - Xl | 37,480 lb ft | |
| Each Additional Shank | 75 lb | |
| Overall Beam Width | 76.8 in | |
| Weight - With One Shank | 1,863 lb | |
| Maximum Penetration - Xl And Lgp | 14.2 in |
| Shipping Weight - Xl | 28,949 lb | |
| Weight - Xl | 28,740 lb |
| Cooling System | 8.6 gal | |
| Fuel Tank | 77.9 gal | |
| Hydraulic Tank | 15.3 gal | |
| Engine Crankcase | 4.4 gal | |
| Final Drive - Each - Xl | 4 gal |
| Brakes | Standards | |
| Rops/Fops | Standards | |
| Cab | Standards |
| Sound Levels - Average Exterior Sound Pressure Level | 79 dB(A) (SAE J88:2006) | |
| Sound Levels - Maximum Sound Power Level | 109 dB(A) (2000/14/EC) | |
| Sound Levels - Dynamic Operator Sound Pressure Level (Lpa)* | 78 dB(A) (ISO 6396:2008) | |
| Vibration Levels - Maximum Hand/Arm** | 2.5 m/s2 (ISO 5349:2001) | |
| Vibration Levels - Maximum Whole Body | 0.5 m/s2 (ISO/TR 25398:2006) | |
| Vibration Levels - Seat Transmissibility Factor < 0.7 | ISO 7096:2000 - spectral class EM6 | |
| Engine Emissions | Fully complies with U.S. EPA Tier 4 Interim/EU Stage IIIB/Japan MLIT Step 4 emission standards |
| Forward | 0-10 km/h (0-6.2 mph) | |
| Reverse | 0-10 km/h (0-6.2 mph) |
PayDirt HQ is a listing marketplace. It is not a party to the sale and does not hold funds, inspect equipment, or arrange freight.
